MODEL
1510 IN-ROW RIPPER ©
The Model 1510 In-Row
Ripper is designed to deep till to a depth of 20" with a minimum of
top soil disturbance. The unique automatic reset parabolic shank pulls up
to 30% easier than the straight leg designs of many competitors. The shank
has a replaceable leading edge beveled wear shin and a standard raised dorsal
fin point. Optional flat, winged and carbide capped fin points are available
as well as adjustable cover boards to increase top soil disturbance and
ridging where it is desirable. To cut residue, 20"spring cushion coulters
are available on the two bar frame only. Clamp type gauge wheels are standard
with 20.5x8-10x8 ply rated tires. Optional screw type gauge wheels and larger
tire sizes are also available.
Specifications
| Model |
1512 |
1514 |
1516 |
1518 |
| Shanks |
2, 3 & 4 |
4, 5 & 6 |
5, 6 & 7 |
6, 7, 8 & 9 |
| Transport Width |
9'0" |
11'0" |
17'0" |
21'3" |
| Toolbar Sizes |
5" x 5" |
5" x 5" |
7" x 5" |
7" x 5" |
| Standard Spacing |
30" |
30" |
30" |
30" |
| Optional Spacing |
2 or 3 shanks up to 38" |
4 or 5 shanks up to 38" |
5 or 6 shanks up to 38" |
6 or 7 shanks up to 38" |
Horsepower
Requirements: 25 to 40 per shank depending on depth of shank.
Back |
