LANDOLL 440

View Photo Gallery Photos may show optional equipment

STANDARD EQUIPMENT
*Capacity 80,000 Lbs. Deck Rating: 50,000 Lbs. In 10 Foot Estimated Base Weight: 17,100 Lbs. (48)+/- 3% Main Frame: Fabricated 80,000 & 100,000 PSI Yield, 40" Center, Four Beam Design Crossmembers: Alternating 4" and 3" Junior I-Beam on 8" Centers Slope Drop: 90 Degree Parking Stands: Jost Two Speed Tires: 235/75R 17.5 LRH Double Coin Rims: 17.5x6.5 Tubleless Wheels: Hub Pilot/Steel Outboard Brake Drums Axles: 2-25,000 Lb. Dual Tire, Oil Bath Bearings Suspension: Neway RLU228 Air Ride 22,500 Lb. Capacity Brakes: 12.25x7.5 Full Air/Spring Brakes ABS, 4S2M Oil Seal Hubs: Internal Mated Assembly Hitch: 5th Wheel King Pin Pin Setting: 21 Inches Swing Clearance: 83.5 Inches Loaded Ground Clearance: 14 Inches at bottom of Gooseneck	Loaded Deck Height: 37 Inches Width: 102 Inches Decking: 1-3/8" Apitong Hardwood Air/Electrical: 7 Way Receptacle Hydraulic Hook Up: Quick Couplers 2500 PSI/17 GPM Wiring Harness: "Grote Ultra-Blue Seal"-7 year warranty Lights: Grote "SuperNova" LED-10 year warranty Tie Downs: Double Key Hole Chain Slots w / Square Stake Pockets on 24" Centers Finish: Steel Grit shot Blast to Bright Metal Powder Coat Color: White/Black/Yellow/Blue/Red/Green Decals: Hi-Visibility Reflective Package Tool Box: Twin Upper Deck Mounted with Lockable Door (7"Hx34"Wx29"D) Hydraulic Winch: Worm Gear 12,000 Lb. with Spring Tension & 85' of 1/2" Cable Tilt Cylinders: 2-6"x30" Undercarriage: 2-4"x126"-48'; 4"x126" & 4"x138"-50'; 4x138"-53', Centralized Grease System; Accepts After-Market Dock Level Hydraulics System; Powder Coated Black Load Angle: 6.5 Degree Accessories: Flat Approach Plate with Six Key Hole Tie Downs, Automatic Slack Adjusters, Main Deck Center Slope Roller,Very Soft Transition from Lower to Upper Deck Hydraulic Valve Body: Prince Electronic
Specifications subject to change without notice.

Download PDF

*Indicates dimension may change due to options indicated.

OPTIONAL EQUIPMENT

BULKHEADS: 48" High Mesh 102" Powder Coated Black   Steel Bulkhead Wings   Aluminum Bulkhead Wings   Bolt-On Binder Storage Rack for 48" Bulkheads   Spare Tire Carrier-48" Bulkhead, Rear Mounted   Halogen Work Light-Dual (Mounted on Bulkhead)   Spare Tire Carrier-48" Bulkhead, Front Mounted   GOOSENECK: Heavy Duty Gooseneck - adds 24" to length of trailer   PARKING STANDS: Pin Drop in lieu of Std   Hydraulic Parking Stands   TIE DOWN RINGS: Flush Mounted "D" rings (Each)   "D" Ring Bolt on at Winch (Each)(Two Locations Available)   Flush Mounted Angled D-Ring (Each)   Recessed Mounted "D" Rings (Each)(Not available with 6" center crossmember option)   Ratchet Winch for 4" Nylon Strap-Weld On (no strap supplied) 1 Side Rub Rail Required   WINCH AND ACCESSORIES: ***All Winches Mounted on Upper Deck Only***   Wireless Remote Control-Six Function with Prince valve body   *BRADEN WINCH OPTIONS*   Delete Standard 12,000 Lb. Braden Winch   20,000 Lb. Braden Winch in Lieu of STD   20,000 Lb. Braden Winch with Pivoting Cable Roller Guide, Air Tension and Air Release in Lieu of STD   Cable Guide (4-Way Rollers) for Braden 12K,20K, (N/A with Pivoting Guide)   Winch Guard for Braden 12/20K Winch   *DP PLANETARY WINCH OPTIONS*   20,000 Lb. DP Planetary Winch with Air Release in Lieu of STD   30,000 Lb. DP Planetary Winch with Air Release in Lieu of STD   *WARN PLANETARY WINCH OPTIONS*   20,000 Lb. Warn Planetary Winch with Air Release in Lieu of STD   30,000 Lb. Warn Planetary Winch with Air Release in Lieu of STD   Cable Roller Guide (4 Way Rollers) for 20K & 30K Warn Planetary Winch   DECK AND ACCESSORIES: 1/8" Steel Tread Plate in Lieu of Std. Wood   Deck Strap 1 1/4"x9" (for Track Area)   27" Aluminum Pull Out Side Extensions (Capacity Not to Exceed 50% of Trailer Capacity     - Frames will have 4in Sq Crossmembers on 16in centers w/3in Jr I-Beams between tubes   Rub/Chain Rail-Web Mounted (Price per Foot of Rail)   Frame with Tube Crossmembers to accept Pullouts (less pullouts)     - Frames will have 4in Sq Crossmembers on 16in centers w/3in Jr I-Beams between tubes   Skid Plate for Container 3/8"x6"   Toe Board 3/8"x2 1/2" on Lower Deck   Extra Web Mounted LED Lights Lower Deck Only (Three per Side)   Front Extension Ramps (In Track Area) (24"Lx31"W Flip-over, upper deck, 3000 Lb. Capacity Distributed)   1/8" Steel Tread Plate Over Std. Wood   Outriggers Swing Out (Less Planks) (Lower Deck Only) (Capacity Not to Exceed 50% of Trailer Capacity)(Steel)   Under Coating, Petroleum based   1/8" Steel Tread Plate Over Approach   Upper Deck Slope Roller in lieu of Std Wear Plate   Keyhole Tie Downs for Center Deck (Level with wood)   SUSPENSION: Dock Level Hydraulic 1 Pair 62,000 Lb.     - - Dock Level Hydrualics Not Available with Low Profile Tires   Air Dump Valve   Air Weigh Digital Scale System   HYDRAULIC POWER SOURCE: Air Shift PTO & Wet Kit for Tractor-Not Installed (30 Gallon Tank Required   Installation of PTO and Wet Kit (NET)   Hydraulic Engine Package-Upper Deck w/Cover Kohler 27 HP Gas   Hydraulic Engine Package-Front Extension Mt. W/Cover, Kohler 27HP Gas   Hydraulic Quick Couplers 1 Male/Female (Matches STD Trailer Couplers) (Part#105902)   TIRES AND RIMS: 10R 17.5 Michelin Tires in Lieu of Std   235/75R 17.5 Michelin Tires in Lieu of Std   10R 17.5 Double Coin Tires in lieu of Std   255/70R 22.5 Double Coin Tires in Lieu of Std 10R 17.5   255/70R 22.5 Michelin Tires in Lieu of Std 10R 17.5   Spare Double Coin Tire & Hub Pilot Type Rim(10R 17.5)   Spare Michelin Tire & Hub Pilot Type Rim (10R 17.5)   Spare Double Coin Tire & Hub Pilot Type Rim (235/75R 17.5)   Spare Michelin Tire & Hub Pilot type Rim (235/75R 17.5)   17.5 Aluminum Wheel (8 Bolt Polished) in Lieu of Std. (Each)   17.5 Aluminum Wheel (8 Bolt Machined) in Lieu of Std. (Each)   22.5 Alum. Wheel (10 Bolt Polished) in Lieu of Std. (Each)   22.5 Alum. Wheel (10 Bolt Machined) in Lieu of Std. (Each)   Hubometer   Pressure Guard Air Inflation   Crossfire Air Equalizers (Price Per Axle)   SPECIAL PRICES: Hot Dip Galvanizing (Trailer Frame is Totally Submerged)     - Adds minimum of 3 weeks to delivery   Paint over Galvanizing - Sides Only with STD Colors Only   Paint over Galvanizing - Top Surface Only with STD Colors Only   Special Paint: Contact Factory

Click here to view PDF of literature.

Click Here to receive printed literature for this product.
(Make sure you click on 440 in the product listing)